MAF100C-0250-FR-S2-AH0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911388050
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAF100C-0250-FR-S2-AH0-05-N1 Induction Motor is manufactured by Bosch Rexroth Indramat. This motor has a Singleturn absolute encoder , EnDat2.1, with 2048 encoder and a Standard bearing. It also has a Plain, without Sealing Ring shaft and is not equipped with a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100C-0250-FR-S2-AH0-05-N1 motor is developed by Bosch Rexroth AG which exemplifies cutting-edge asynchronous motor technology. This MAF motor which can be utilized in many industrial automated applications, is renowned for its dependability and efficiency. It operates in two modes: S1 (continuous operation) and S6 (periodic operation) with surface cooling provided by either fan units or liquid cooling. This motor is designed to meet stringent standards ensuring optimal performance also in harsh conditions. Our company, Wake Industrial sells and can deliver this motor worldwide through our efficient distribution network.
The motor can handle a duty cycle of S6 operation with a percentage duty cycle. It has a discharge capacity of 6.6 nF, a power wire cross section of 1.5 mm? and a sound pressure level of 70 (+3) dB(A). For enhanced protection especially in environments using oily cooling lubricants, the motor can be equipped with a sealing air connection. This feature introduces overpressure into the motor?s interior preventing the ingress of creep oils and cooling lubricants.
MAF in the type code signifies the product type, 100 represents the size and C indicates the length. The winding specification is 0250. The cooling type is FR meaning it has liquid cooling with an enclosed rapid action coupling. The encoder type S2 refers to a single turn absolute encoder with 2048 increments. The A indicates an electrical connection on the A side with a connector. The H shows it has a plain shaft without a sealing ring. There is no holding brake (0) and the 05 specifies flange mounting. Finally, N1 denotes standard bearings with vibration severity according to DIN EN 60034-14.
