Product Description:

The MAF100C-0250-FQ-S2-HH0-35-H3 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. This three-phase machine converts electrical power into controlled mechanical rotation for production lines that demand steady torque and continuous heat removal. Its sealed housing protects the stator windings from airborne contaminants while providing a rigid mounting surface for integration in automated equipment.

Thermal management relies on liquid cooling through a connection thread, and the manifold mates with a 1/4 inch port so plant plumbing can be attached without adapters. The winding set reaches a nominal speed of 2500 rpm, and high-speed bearings support that rotation while limiting vibration to level B. Protection against dust and water jets is provided by the IP65 enclosure. Power enters on the B-side through a turnable terminal box, and the motor can be secured by flange or foot mounting as required. The motor has no holding brake, so external devices must secure static loads. Feedback uses the EnDat2.1 digital interface, and the single-turn absolute encoder supplies position information with a resolution of 2048 increments.

Control electronics receive positional data at 7–12 V, eliminating the need for auxiliary regulators inside the drive cabinet. Electrical insulation is rated class F, permitting winding temperatures expected under sustained liquid cooling. The machine operates in ambient temperatures from 0–40 °C without derating, in line with DIN EN 60034-14. It has frame size 100 with length code C, and winding code 0250 matches the stator to compatible IndraDrive inverters. The motor also uses a plain shaft without a shaft sealing ring, which suits installations that do not require a sealed shaft interface.