Product Description:

The MAF100C-0250-FQ-S2-AH1-05-N1 is an asynchronous motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled asynchronous housing motor intended for drive duties where heat is carried away by coolant rather than by surrounding air. The unit uses flange mounting, a standard bearing set, and a plain shaft without a shaft sealing ring to reduce friction at the output. Its frame size 100 and length code C give it a compact housing that fits DIN machine layouts and suits enclosed industrial installations where stable rotary motion is required.

Heat removal is handled by liquid cooling through a dedicated connection port machined with a 1/4 inch thread to match common hose fittings. Electrical energy reaches the stator from the A-side power connector, and feedback is supplied by an EnDat2.1 interface fed with 7–12 V to a single-turn absolute encoder that resolves rotor position in 2048 increments. The winding code 0250 and insulation class F establish the motor’s electrical and thermal operating characteristics, while vibration level A supports smooth running during continuous motion. An electrically released holding brake delivers 24 Nm of static torque, and the housing is sealed to IP65 so dust and water jets are kept out of the motor interior.

The motor reaches a rated velocity of 2500 rpm and can operate in ambient temperatures from 0 to 40 °C. Its mechanical balance follows class A vibration limits and the rotor standard in DIN EN 60034-14, so couplings to gearboxes or belt-driven loads do not require special damping measures. The side-mounted power connection helps keep cabling clear of nearby tooling, and the low-friction shaft arrangement supports steady high-speed operation. The brake and bearing arrangement also help the axis stop cleanly and restart smoothly in packaging, printing, and material transfer equipment.