Product Description:

The MAF100C-0250-FQ-S2-AH0-35-N1 is an asynchronous induction motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it delivers rotational power to automated machines that run at continuous duty. The assembly uses motor frame size 100 with the C length code and follows DIN EN 60034-14 vibration limits, making it suitable for precision production cells where balanced mechanical behavior and a closed housing are required. As an asynchronous motor, it is intended to operate with a matching drive controller that regulates torque and slip during changing process loads.

At a rated speed of 2500 rpm, the rotor can be coupled to gearboxes without overspeeding the 0250 winding set. Heat is removed by liquid cooling, which flows through a 1/4-inch connection thread for integration with plant chiller circuits. Power enters through a connector on side A, and the flange-and-foot mounting arrangement supports both base and face installation. Standard rolling bearings carry the shaft in conformity with vibration level A. The drive end uses a plain shaft without a sealing ring, and the motor is supplied without a holding brake, so static loads must be secured by external means when required. An enclosure rating of IP65 helps protect internal parts against dust ingress and low-pressure water jets during washdown maintenance.

The position feedback system uses an EnDat 2.1 single-turn absolute encoder powered from a 7 to 12 V line and capable of reporting rotor angle in 2048 increments. This digital channel allows immediate field-oriented control after startup without a homing move, and it supports stable speed regulation as load conditions change. Class F insulation allows winding temperatures up to 155 °C when coolant flow is briefly reduced. Continuous operation is specified for ambient conditions from 0 to 40 °C, allowing the motor to deliver full output inside standard industrial enclosures.