MAF100C-0250-FQ-S2-AG0-05-R1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911314990
The Bosch Rexroth Indramat MAF100C-0250-FQ-S2-AG0-05-R1 is part of the MAF IndraDyn Asynchronous Motors series and utilizes liquid cooling with a 1/4 inch connection thread. This liquid-cooled asynchronous housing motor has a flange mounting style, protection class IP65, and follows the DIN EN 60034-14 standard. It features a single-turn absolute encoder with EnDat2.1 interface and an encoder resolution of 2048 increments.
Internal Product Review
The MAF100C-0250-FQ-S2-AG0-05-R1 is a liquid-cooled asynchronous housing motor with flange mounting. The EnDat2.1 single-turn absolute encoder supports accurate feedback and streamlined integration in motion systems. IP65 protection and a rated speed of 2500 min-1 make the motor a strong choice for dependable machine service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100C-0250-FQ-S2-AG0-05-R1 is an asynchronous motor produced by Bosch Rexroth Indramat and placed in the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled housing motor, it converts electrical energy into mechanical rotation for tightly controlled industrial axes that require continuous torque while using minimal installation space. The unit is intended for flange-mounted placement on machine frames where integrated coolant passages remove heat and support high duty cycles in automation cells. This layout is well suited to enclosed machinery where heat must be carried away through a coolant circuit instead of depending on surrounding air.
Heat is removed by liquid cooling, which passes through the stator jacket by way of a connection thread sized 1/4 inch; this arrangement simplifies piping and helps keep the housing temperature stable. Feedback to the drive is carried over the EnDat2.1 digital interface, which supports automatic parameter transfer during startup. The flange mounting interface matches frame size 100 and the C-length code to DIN dimensions, while vibration level A helps keep dynamic forces on the machine bed low. Electrical power reaches the windings through a connector on the A-side, which allows cable changes without rerouting the harness. A shaft sealing ring works with the IP65 enclosure to block dust and coolant, and the motor reaches its rated speed at 2500 rpm for continuous-duty operation.
For position reference, the single-turn absolute encoder delivers 2048 increments and operates from an excitation range of 7–12 V, so the drive can detect rotor angle immediately after a restart. Insulation class F allows the stator to tolerate elevated winding temperatures, coordinated with a permissible ambient range of 0 to 40 °C. The motor has no holding brake, so gravity-loaded axes require an external clamping method when the shaft must remain fixed at standstill. Compliance with DIN EN 60034-14 indicates that balance and vibration behavior follow standard industrial motor requirements.
