Product Description:

The MAF100C-0250-FQ-S0-AH0-05-R1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is intended for industrial automation applications that require regulated rotary power for conveyors, plastic processing screws, and hydraulic pump drives in continuous-duty service. The motor uses frame size 100 with C length and winding code 0250 to support stable torque over a broad speed range. As a housing motor, it is suited to machine layouts that integrate the drive closely with the driven assembly.

The motor uses liquid cooling, with coolant routed around the stator through a built-in jacket and a 1/4-inch connection port. This cooling path helps keep the windings within insulation class F, allowing continuous operation at the rated speed of 2500 rpm without thermal derating. Installation uses flange mounting, which supports direct attachment to gearheads or pump blocks while keeping the pilot diameter aligned. The housing has an IP65 protection rating, which keeps out dust and protects against low-pressure water jets. Vibration level A is suited to general industrial balancing requirements.

Service connections are grouped on the A-side, where the power leads terminate in a connector that helps simplify cable routing inside enclosures. The motor operates reliably in ambient temperatures from 0 to 40 °C, which matches common industrial installation conditions. Torque is transmitted through a plain shaft, and there is no shaft sealing ring, so an external seal is needed if the application involves fluid exposure. The unit is supplied without a holding brake, so position retention must be provided by the drive or by external clamps. Its mechanical design follows DIN EN 60034-14, which supports the stated vibration class and compatibility with compliant machinery.