MAF100C-0250-FQ-M2-EH0-05-A1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911326518
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAF100C-0250-FQ-M2-EH0-05-A1 Induction Motor is manufactured by Bosch Rexroth Indramat. This motor has a Multiturn absolute encoder with, EnDat2.1, 2048 increments encoder and a Fixed bearing, A-side bearing. It also has a Plain, without Sealing Ring shaft and is not equipped with a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
With a rated torque of 40.0 Nm & a rated power of 10.47 kW, the MAF100C-0250-FQ-M2-EH0-05-A1 motor is intended to satisfy the demands of high-performance industrial applications. The rated current that it operates at is 27.8 A, and the rated speed that it operates at is 2,000 1/min. However, the crucial speed that it operates at is 9,000 1/min. In accordance with the bearing that is being used, the maximum speeds may range from 11,000 revolutions per minute with bearing A to 9,000 revolutions per minute with bearing H to 6,000 revolutions per minute with bearing N. In order to deliver a stable and efficient performance, the motor has the ability of reaching an ultimate torque of 91.0 Nm and a maximum electrical output of 22.50 kW.
In order to provide accurate feedback and extra safety measures, the SF-A3.0042.030-10.015 model has both an encoder and a holding brake. It is feasible for this motor to function reliably in demanding situations with temperatures that vary from -4 degrees Celsius to +155 degrees Celsius since it has been fitted with thermal motor protection along with thermistors that have been integrated into the windings. Because it meets the standards of IEC 72-2, the motor is guaranteed to be of high quality & very durable for use in industrial settings.
This motor is built in accordance to DIN IEC 34-7 requirements and has the basic construction type IM B5. Additionally, it may be tailored for IM V1 and IM V3 installations, providing a wide range of mounting choices to give adaptability. Holding brakes that have become worn should only be used when the shaft is in an upright state. This is a crucial point to keep mindful of since they might provide possible dangers. Upon request, extra specifications are made available for applications that need bigger moments of inertia. The SF-A3.0042.030-10.015 model may be modified to fulfill the requirements of a particular application.
