Product Description:

The MAF100C-0250-FQ-M2-AH0-05-A1 asynchronous motor is produced by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. As a housing motor, it provides controlled rotary power for indexing tables, forming rolls, and other drive systems that require stable speed control during continuous operation. The unit mounts by flange, routes power through an A-side connector, and uses a plain shaft for direct coupling to the driven mechanism. This layout supports compact machine integration where a separate gearbox or coupling assembly is already part of the axis design.

Heat from the stator is removed by liquid cooling supplied through a 1/4 inch connection thread on the housing. This threaded port allows closed-loop coolant lines to connect directly to the motor jacket and helps maintain stable operating temperature under sustained load. The enclosure is rated IP65, which protects internal components from dust and low-pressure water jets in industrial environments. At the rated point, the rotor runs at 2500 rpm. Position data are transmitted over the EnDat2.1 interface, and the multi-turn absolute encoder supplies shaft-angle information to the drive without requiring an external feedback device.

The encoder generates fine position data at 2048 increments per revolution, which supports accurate velocity regulation and precise feedback processing in the connected drive. Thermal performance is supported by insulation class F, and vibration severity grade A indicates smooth mechanical running during operation. Continuous duty is permitted within an ambient temperature range of 0 to 40 °C. The motor has frame size 100 with length code C, and it does not include a holding brake or a shaft sealing ring. An A-side fixed bearing carries radial and axial loads while helping maintain shaft alignment during service.