Product Description:

Bosch Rexroth Indramat manufactures the MAF100C-0250-FQ-M2-AG0-35-N3 in the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous housing motor is intended for flange or foot installation in automated machinery where stable torque and controlled heat rise are required. It combines closed-loop feedback with a sealed housing, making it suitable for conveyors, processing equipment, and other factory systems that need reliable speed regulation during continuous operation. Its housing style supports direct installation on machine frames where compact motor placement and stable thermal behavior are important.

The motor’s nominal operating point is 2500 rpm, which suits the 0250 winding code for constant-torque operation with a compatible inverter. Heat is removed by liquid cooling, and the coolant enters through a 1/4-inch connection thread that supports straightforward hose routing. The internal encoder resolves 2048 increments, and its EnDat2.1 interface carries position data and diagnostic information over a single connection. A protection rating of IP65 keeps dust out and resists low-pressure water jets, while the A-side power connector keeps high-current wiring separate from feedback circuits. The encoder is powered by the drive, and standard bearings support the radial loads common in belt-driven arrangements.

Insulation class F allows the winding system to operate at elevated internal temperatures, and continuous operation is permitted between 0 to 40 °C. Dynamic balance reaches vibration level B in accordance with DIN EN 60034-14, which helps reduce vibration during normal running. The plain shaft uses a sealing ring to limit the entry of coolant or oil, and the motor is supplied without a holding brake, so any static load must be held by the drive or external mechanics. Frame size 100 with length code C sets the mounting geometry for the motor body and helps match common machine interfaces.