Product Description:

The MAF100C-0250-FQ-M0-AG5-05-N1 asynchronous motor is produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled housing motor intended for flange-mounted drive axes where continuous torque density matters more than keeping the frame as small as possible. In automated lines and machine tools, the unit converts electrical energy into rotating mechanical output that can be controlled by a matched inverter. Because it is intended for variable-speed drive operation, the motor can support process steps that require smooth acceleration, regulated running speed, and stable torque under changing load. This operating style suits transport axes, process drives, and other machinery that runs for extended periods under controlled load conditions.

Its cooling circuit uses liquid cooling, so heat is carried away by a closed fluid loop rather than surrounding air. The inlet and outlet use a connection thread with a nominal diameter of 1/4 inch, which helps the motor connect to common industrial coolant manifolds. An electrically clamped holding brake delivers 30 Nm of static torque to secure vertical or indexing loads when power is removed. During normal operation, the rotor reaches a rated speed of 2500 rpm, which suits medium-speed shafts and matched inverter control. The housing meets IP65, which protects internal live parts from contact and resists water jets and dust exposure. This arrangement also helps the motor operate in enclosed machine spaces where free-air cooling is limited.

Flange mounting keeps the 100-frame stator centered, and the standard bearing set supports the radial loads expected for the size-C length. The power lead exits on the A-side through a sealed connector, and a shaft sealing ring helps keep coolant or contaminants away from the bearing cavity. Electrical insulation is rated to Class F, which supports elevated winding temperatures during continuous duty. The drive end uses a plain shaft, which works well with clamping hubs or pulleys. Acceptable ambient air ranges from 0 to 40 °C, and dimensional and balance requirements conform to DIN EN 60034-14. The sealed cable exit and shaft seal support use in machine areas where splash or airborne debris can reach the motor during operation.