MAF100C-0250-FQ-M0-AG0-05-N2
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911316179
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAF100C-0250-FQ-M0-AG0-05-N2 Induction Motor is manufactured by Bosch Rexroth Indramat. This motor has a Multiturn absolute encoder with 512 increments encoder and a Standard bearing. It also has a Plain, with Sealing Ring shaft and is not equipped with a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Rexroth Bosch manufactures the servo motor MAF100C-0250-FQ-M0-AG0-05-N2. With its standard bearings (N) and ability to manage moderate to medium radial and axial loads, this servo motor is ideal for situations where the forces acting on the motor shaft are not too great. The rated torque (MN) of 62.0 Nm for this servo motor indicates the maximum torque it can produce continuously at its rated speed. 16.23 kW is the rated power (PN) of the motor, which represents its power output capability at the given rated speed and torque. The motor's rated current (IN) of 40.2 A is the amount of current it draws while running normally. The rotational speed at which the motor is intended to function well and provide its rated power and torque is defined by its rated speed (nN) of 2500 min^-1.
The torque-speed curve of the motor's key speed (n1) of 2000 min^-1 indicates the point at which the torque starts to fall off before reaching its rated speed. The motor can provide a constant torque at a standstill (Mn1) and current (In1) up to this point. The torque of the motor steadily reduces after surpassing the critical speed, yet it can still provide 33.27 kW of maximum power (PS6max). The motor's maximum torque (Mmax) of 138.1 Nm is its maximum torque achievable at its maximum current (Imax) of 85.8 A.
The motor can run safely at the greatest rotational speed of 9000 min^-1, which is its maximum speed (nmax). The mechanical design of the motor, especially the bearings, usually limits its speed. This motor can produce a torque of 62.0 Nm constantly while the rotor is not moving (at rest) in the S1 continuous operating mode, according to the continuous torque at a standstill (Mn1) of 62.0 Nm. In order to sustain this constant torque at zero speed, a current of 38.5 A is needed, as shown by the continuous current at a standstill (In1) of 38.5 A. We provide a warranty for a year.
