Product Description:

The MAF100C-0250-FQ-C0-EG0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. This product links a variable-frequency drive to a rigid mechanical output shaft, supplying controlled torque for automated production lines, packaging systems, or material-handling stations where continuous rotation and a compact thermal design are necessary. Its asynchronous design suits applications that need steady rotation under inverter control in compact machine spaces. The motor uses frame size 100 with length code C, giving it a housing format suited to medium-duty industrial motion tasks.

Heat is removed by liquid cooling, delivered to the stator jacket through a 1/4-inch connection thread, so winding temperature stays stable even at the rated speed of 2500 rpm. The housing is sealed to IP65, which blocks dust ingress and low-pressure water jets, and a shaft sealing ring adds a second barrier at the output end. Position feedback comes from an incremental encoder that delivers 2048 increments per revolution and operates from 5 V, giving the drive controller fine speed resolution without a separate supply rail. The motor uses standard bearings, winding code 0250, and insulation class F conductors, while flange or foot mounting supports different machine layouts.

The rotor uses a plain shaft for direct coupling to gearboxes or synchronous belts. Compliance with DIN EN 60034-14 supports balanced running, and electrical supply reaches the windings from the turnable terminal box on the A-side, which helps clear surrounding hardware. The allowable ambient range of 0 to 40 °C matches typical shop-floor conditions, while the liquid coolant circuit keeps thermal load out of the enclosure air. Vibration level A helps keep dynamic forces low during operation. The motor is supplied without a holding brake, which reduces mass where passive shaft locking is not required.