Product Description:

The MAF100C-0200-FR-S6-KP0-05-N1 is an asynchronous induction motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Engineered for liquid-cooled service, it supplies rotational power to automated conveyors, presses, or spindles where high thermal loading and tight installation spaces coexist. A flange mounting face and a keyed shaft enable direct mechanical integration with couplings or gearboxes, while the internal sensor set supports closed-loop speed regulation inside multi-axis control architectures.

The motor’s rated speed is 2000 rpm, which is its nominal operating speed under continuous load and is used for drive tuning and gearbox selection. The motor is sealed to IP65, which prevents dust ingress and resists low-pressure water jets during operation inside standard machine frames. Heat generated in the stator windings is removed by liquid cooling; an enclosed rapid-action coupling sized at 1/4 inch allows quick connection to an external coolant manifold without tools. For feedback, the motor uses a digital EnDat2.1 interface, making absolute position data available to modern servo inverters through a single shielded cable and eliminating analog signal calibration.

The single-turn absolute encoder supplies 2048 increments per revolution, giving controllers fine granularity for velocity and position loops, and it operates from a logic rail of 7–12 V, so it can share power with standard drive I/O rails. The coil insulation is class F, allowing winding temperatures up to 155 °C before thermal limits are reached, which complements the liquid cooling system by adding thermal headroom during transient overloads. The motor is intended for operation in ambient temperatures from 0–40 °C, which helps preserve bearing grease life and maintain the vibration rating A of the rotor-shaft assembly.