Product Description:

The MAF100C-0200-FR-S2-BQ0-05-N1 belongs to the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. This liquid-cooled asynchronous housing motor is intended for continuous industrial operation where heat must be removed directly from the stator. It is supplied in a size 100 frame with length code C and is configured for flange installation on machine housings, allowing compact integration into automated conveyor, forming, or processing stations. Its enclosed motor concept supports installation in equipment where controlled thermal behavior and compact machine layouts are important.

Process heat is extracted by liquid cooling that flows through an enclosed rapid-action coupling sized at 1/4 inch. The winding set identified by code 0200 is matched to a rated mechanical speed of 2000 rpm. Mechanical attachment uses flange mounting, and rotor balance is achieved with a complete key for smooth transmission through the keyed shaft. No shaft sealing ring is fitted, so external sealing must be provided when fluids are present. The shaft turns in standard bearings, and the motor meets DIN EN 60034-14 vibration level A. Power enters from the B-side through a sealed connector, which helps keep cable routing clear of the driven load side.

Motion feedback is delivered by an encoder that uses the EnDat2.1 interface. This single-turn absolute unit resolves shaft position in 2048 increments and operates from a supply of 7–12 V, allowing direct connection to modern IndraDrive controllers. The housing carries a protection rating of IP65, so dust ingress is prevented and low-pressure water jets do not impair function. Class F insulation supports winding temperatures associated with heavy-duty cycles, while operation is permitted at ambient temperatures from 0 to 40 °C. The motor is built without a holding brake and relies on standard bearing support, which suits applications where external load holding is handled elsewhere in the machine.