Product Description:

The MAF100C-0200-FR-S2-BQ0-05-A1 is an asynchronous motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed as a liquid-cooled housing unit, it supplies controlled shaft power to automated lines, presses, or test stands. Frame size 100, length code C, and flange mounting let the assembly couple directly to gearboxes, while a B-side power connector routes cabling away from the work zone. The design also includes a fixed bearing on side A and a keyed shaft for secure torque transfer.

Heat is removed by liquid cooling that flows through an enclosed rapid-action coupling sized at 1/4 inch, allowing the stator to maintain rated output without external fans. Position data come from a single-turn absolute encoder that communicates through the EnDat2.1 interface; its native resolution of 2048 increments supports precise speed loops, and the 7–12 V supply range matches common drive controllers. The rotor reaches a rated speed of 2000 rpm with winding code 0200, and vibration level A keeps dynamic forces low. Complete-key balancing minimizes residual shaft imbalance. The unit ships without a holding brake or a shaft sealing ring, so applications requiring static torque or high fluid exclusion must add external components. Power enters through a sealed connector on the rear, matching the IP rating referenced below.

The housing carries a protection class of IP65, blocking dust and water jets, and it operates reliably in ambient temperatures from 0 to 40 °C without derating. Windings use insulation class F, allowing conductor temperatures up to 155 °C before thermal limits are reached. Compliance with DIN EN 60034-14 sets the permitted vibration severity for the flange arrangement, and the flange offers the reference plane needed for accurate alignment to driven equipment.