Product Description:

The MAF100C-0200-FR-M6-FG0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for flange mounting on machine frames, it supplies rotary motion to production equipment that must remove high thermal loads through an internal coolant circuit instead of relying on ambient airflow. The motor uses a plain shaft for direct coupling to driven components, and standard rolling bearings support the radial and axial loads that occur during operation.

The motor reaches a rated speed of 2000 rpm and maintains the enclosure integrity required by the IP65 protection class. Heat is removed by a liquid cooling jacket around the stator, allowing continuous operation inside sealed cabinets where air circulation is limited. Position and speed feedback are provided by an EnDat 2.1 interface connected to a multi-turn absolute encoder with 2048 increments of resolution, and the factory-assembled 15 m feedback cable allows the drive to be mounted away from the motor. A shaft sealing ring helps keep coolant or process fluids out of the bearing cavity, while insulation class F materials support winding temperatures suited to continuous S1 duty. The frame size 100 stator and length code C rotor use winding code 0200, and vibration level A matches general-purpose balance limits.

Liquid circulation connects through an enclosed rapid-action coupling sized at 1/4 inch, and the feedback electronics draw 7–12 V from the drive to power the encoder. Operation is specified for ambient temperatures from 0 to 40 °C, and within this range the motor meets the mechanical vibration and noise limits of DIN EN 60034-14. Because the motor is supplied without a holding brake, the axis must be held at standstill by external clamping or drive torque during power loss.