Product Description:

The MAF100C-0200-FQ-S2-AG0-05-N1 is an asynchronous drive unit produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled housing motor, it is intended for industrial automation lines that demand steady torque while keeping enclosure temperatures low. Integrated into a flange-mounted frame, the unit couples directly to machine shafts where it converts variable-frequency electrical power from an inverter into rotational motion for pumps, extruders, or material-handling equipment. Its configuration suits inverter-fed applications that require stable output during long operating cycles.

Heat is removed by liquid cooling, and a 1/4-inch cooling connection thread on the A-side housing supports closed-loop coolant flow that keeps the stator windings below their Class F insulation limit. The motor reaches a rated speed of 2000 rpm, which balances slip losses with drivetrain inertia in medium-frame machines. Position feedback is provided by a single-turn absolute encoder that transmits 2048 increments over the EnDat2.1 digital interface and operates from a 7 to 12 V supply for noise immunity. An IP65 enclosure protects the motor against process dust and water jets, while vibration grade A in accordance with DIN EN 60034-14 helps protect the bearings during continuous duty.

The motor uses flange mounting, so it can bolt directly to a gearbox or machine plate without adapter plates. Power is routed through a connector on the A-side, which helps simplify cable routing in compact cabinets. The drive end uses a plain shaft with a shaft sealing ring, and the unit is supplied without a holding brake, so vertical axes require external load holding. The sealing ring helps limit contaminant entry at the output end. The allowable ambient temperature range is 0 to 40 °C, and standard bearings support stable shaft operation when the motor is aligned correctly.