Product Description:

The MAF100C-0200-FQ-N0-BG0-35-N1 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat and is part of the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled drive source, it is intended for continuous-duty positioning or spindle tasks in industrial automation where frame vibration must remain low during prolonged operation. The product combines a 100 frame size with a C-length stator to deliver stable torque while fitting both flange and foot mounting patterns in compact machine layouts.

This model employs liquid cooling, allowing high thermal dissipation through a cooling connection thread that accepts hoses with a 1/4 inch coupling. At a rated speed of 2000 rpm, the rotor can synchronize with standard 50/60 Hz inverter output without overspeeding typical tool spindles. The housing has an IP65 protection class, so dust ingress and water jets do not reach the internal windings, helping protect the Class F insulation. Power is routed through a connector on the B-side of the stator, which simplifies cabinet wiring and keeps encoder space clear because this version is supplied without an encoder or a holding brake. Bearings are provided in the standard configuration, and winding code 0200 matches drives that expect mid-range stator impedance.

The permitted ambient operating range is 0 to 40 °C, which suits most factory floor conditions. Insulation class F supports winding temperatures up to 155 °C, extending service life during cyclic overloads common to high-duty spindles. The motor has a plain shaft and an installed shaft-sealing ring, which helps retain lubricant while meeting DIN EN 60034-14 vibration level A. All power leads exit on the B-side, which keeps coolant fittings unobstructed on the opposite face and supports clear hose routing to external chillers.