Product Description:

The MAF100C-0200-FQ-N0-BG0-05-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. Designed for flange integration into automated production cells, it converts drive power from an external inverter into controlled rotary motion for conveyors, packaging stations, and similar equipment. Standard bearings support the plain shaft, the motor does not include an encoder, and the unit is supplied without a holding brake, so position feedback and static-load retention must be handled externally.

The stator is wound for a rated speed of 2000 rpm, giving machine builders a balanced combination of torque and velocity for medium-duty axes. Continuous heat is extracted by liquid cooling that circulates through a 1/4-inch connection thread, keeping the frame within thermal limits even under cyclic overloads. An enclosure rating of IP65 protects internal components from dust ingress and low-pressure water jets, enabling installation near washdown zones. Class F insulation allows the winding temperature to rise to 155 °C without loss of dielectric strength. Power reaches the stator windings through a connector positioned on side B, which can simplify cable routing in tight cabinets.

The motor operates in ambient temperatures from 0–40 °C, which aligns with typical factory floor conditions. A shaft sealing ring is fitted to minimize coolant or lubricant migration along the plain shaft while preserving low friction. Installation is done through flange mounting, consistent with DIN EN 60034-14 and the 100 frame size used for this motor. Dynamic behavior meets vibration grade A, so coupling forces stay within limits for precision tools. The C-length frame uses threaded cooling ports and leaves room at the machine level for external sensing or holding components when those functions are required.