Product Description:

The MAF100C-0200-FQ-M2-BH0-05-H2 is an asynchronous motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It uses a C-length frame in size 100 and installs through flange mounting, while the power connector is oriented on the B-side to simplify cabinet wiring. High-speed bearings and F-class insulation allow the rotor to operate under elevated thermal and mechanical stress during continuous duty. With winding code 0200, the stator characteristics are matched to standard IndraDrive inverters, providing the torque needed for indexing tables, form presses, and conveyor modules in automated lines.

Thermal energy is removed by liquid cooling, and a connection thread sized 1/4 inch allows standard hoses to connect directly to the jacket. Position feedback comes from a multi-turn absolute encoder that uses the EnDat2.1 interface and resolves 2048 increments per revolution. Its electronics accept 7-12 V, so the signal remains valid during supply voltage dips. Shipped without a holding brake, the motor depends on the drive for static torque in lifted axes. At a rated speed of 2000 rpm, it suits the duty profile of liquid-cooled asynchronous housing motors used with IndraDrive systems.

For installation planning, the housing carries an IP65 ingress rating, so dust and low-pressure water jets cannot reach the stator or encoder cavity. Operation is limited to 0 – 40 °C, allowing the coolant circuit to keep the windings within their thermal limits. Torque is transferred through a balanced plain shaft supplied without a shaft sealing ring; this reduces friction but requires shielding from splashed fluids. The rotor support maintains alignment during rapid reversal cycles, and the shaft interface allows direct coupling to gearboxes or driven rollers. These provisions simplify integration into packaging, extrusion, and material-handling machines that already provide closed-loop cooling water.