Product Description:

The MAF100C-0200-FQ-M2-AP0-35-N3 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat and supplied within the MAF IndraDyn Asynchronous Motors series. This motor is installed as a prime mover in automated material-handling cells, packaging lines, and other drive assemblies that require continuous torque without bulky external fans. A sealed housing with internal coolant passages helps maintain temperature stability while preserving the mechanical envelope commonly used by standard foot-mounted or flange-mounted AC motors in industrial automation.

The unit is protected to IP65, so abrasive dust or directed washdown jets do not reach the windings or bearings. A rated speed of 2000 rpm supports mid-range conveyor or spindle duties, and stable operation is maintained at ambient temperatures from 0 to 40 °C. Heat is removed through a liquid circuit that enters and exits through a threaded port measuring 1/4 inch, allowing simple hose connections. The housing complies with DIN EN 60034-14 vibration limits, and overall vibration is classified at level B. Standard flange and foot mounting, together with an A-side power connector, simplify alignment in multi-motor frames. A keyed shaft with a sealing ring helps prevent lubricant loss, and the internal EnDat interface uses the EnDat2.1 format for feedback transmission.

A multi-turn absolute encoder provides positional data at 2048 increments and is energized by a supply of 7–12 V, so external reference moves are not required after power cycles. The motor uses winding code 0200 to support sustained duty while keeping copper losses under control. Because the design is supplied without a holding brake, static positioning must rely on drive torque or a mechanical lock. Power reaches the stator through a keyed connector, which keeps the electrical connection secure during operation.