Product Description:

The MAF100C-0200-FQ-M2-AG5-05-N1 asynchronous motor is built by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled asynchronous motor, it converts inverter energy into mechanical rotation for conveyor sections, forming stations, and other precisely regulated axes inside automated lines. Its operating concept is suited to applications that need controlled speed with dependable torque delivery under changing process loads. The compact housing layout also supports installation where the motor must fit close to driven machine elements.

It uses flange mounting to DIN EN 60034-14 with a frame size 100 stator and length code C, so the active core is sized for medium duty while remaining compact for close-coupled machinery. A plain shaft with a shaft sealing ring works with the standard bearing set to keep lubricant in and contaminants out, while vibration level A helps limit mechanical stress on connected equipment. Power arrives through a connector on the A-side, and winding code 0200 matches drive modules that supply the required current density. Heat is removed by liquid cooling through a threaded connection that ends in a 1/4 inch port, which allows coolant lines to be integrated without external airflow. The multi-turn absolute encoder uses the EnDat2.1 interface and provides 2048 increments per revolution for accurate feedback, while insulation to class F supports elevated winding temperatures during short overloads.

The encoder supply operates from 7–12 V, which helps maintain feedback during brief bus voltage dips. An electrically clamped brake provides 30 Nm of holding torque so vertical or indexing axes remain fixed when drive power is removed. In motion, the rotor reaches 2000 min⁻¹, a speed that suits asynchronous torque characteristics and common gear stages. The housing has an IP65 rating to resist dust and low-pressure water, and the motor is intended for ambient temperatures of 0–40 °C without derating.