MAF100C-0150-FQ-S2-LG0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911327005
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF100C-0150-FQ-S2-LG0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features flange mounting with a plain shaft and standard bearings. This liquid-cooled asynchronous motor uses an EnDat2.1 single-turn absolute encoder with 2048 increments and operates at a rated speed of 1500 min-1. It has IP65 protection, insulation class F, and follows DIN EN 60034-14 standards.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100C-0150-FQ-S2-LG0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for integration into liquid-cooled drive trains, this motor provides constant mechanical power for automated lines that require continuous duty and limited installation space. In industrial automation, it is mounted on the machine frame and, when connected to a matched inverter, supplies rated torque to conveyor belts, material-handling units, and machining fixtures at a controlled speed. Its enclosed design also supports use in tightly packaged machine sections where conventional fan-cooled motors would be less practical.
Heat generated in the stator windings is removed by liquid cooling, allowing full torque delivery without reliance on ambient airflow. The cooling channels terminate in a connection thread with a 1/4 inch port, so standard industrial fittings can be attached directly to the housing. Position feedback is supplied by a single-turn absolute encoder that communicates through EnDat2.1, giving digital position data to the drive controller. Its optical disc provides 2048 increments per revolution, and the encoder electronics receive power in the range of 7–12 V. Under rated load, the rotor reaches 1500 rpm, which supports stable speed control in conveyor, pump, and gearbox-driven applications.
A die-cast housing sealed to IP65 prevents dust ingress and withstands water jets, so the unit can be washed down without additional guarding. The windings use F insulation, providing a 155 °C thermal limit that matches the steady temperature control available from the cooling system within a 0–40 °C ambient range. Installation is straightforward because the frame uses flange mounting geometry according to DIN EN 60034-14. The plain shaft is protected by a sealing ring, vibration is limited to class A, and the left-side power connector helps keep cable routing clear of coolant lines and nearby machine hardware.
