Product Description:

The MAF100C-0150-FQ-S2-LF0-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for integration into liquid-cooled drive axes, the unit converts electrical energy into mechanical rotation for conveyor lines, presses, and other continuous-duty machines in automated plants. The motor has frame size 100, length code C, and a flange and foot mounting layout that allows direct coupling to gearboxes or belt stages, while the plain shaft and left-side power connector simplify cable routing.

During continuous operation, the motor delivers a rated mechanical output of 10.4 kW. This power is produced when the shaft delivers 66 Nm of torque at a rated speed of 1500 rpm, values that match winding code 0150 and the three pole-pair magnetic design. At that operating point, the stator draws 27.9 A from the inverter, so connected conductors must be sized for that current. Heat generated by copper losses is removed by the integrated liquid cooling jacket; coolant enters through a 1/4-inch threaded port and exits through a matching return, helping keep winding temperature within the F-class insulation limit.

Dynamic operation is supported by a maximum speed capability of 9000 rpm, allowing short acceleration bursts well above the 1000 rpm derating point. When loaded near its peak, the rotor can generate 149 Nm of torque, while a continuous standstill value of 68 Nm provides force for tensioning or indexing tasks. The housing and labyrinth shaft seal meet the IP65 protection class, which blocks dust ingress and resists water jets in exposed installation areas. Operation is specified for ambient temperatures from 0 °C to 40 °C, and vibration level A under DIN EN 60034-14 keeps displacement within standard machine tolerances.