Product Description:

The MAF100C-0150-FQ-S2-HH0-05-N1 is a liquid-cooled asynchronous motor produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. It mounts to a standard machine flange and uses an internal coolant circuit instead of external airflow, which supports continuous torque duty in confined drive compartments. Digital position feedback allows IndraDrive inverters to regulate torque precisely during speed-controlled or position-related motion tasks. The 100-frame structure keeps the motor compact for automated lines where surrounding machine elements leave limited space for larger drive packages.

Heat generated in the stator is removed by liquid cooling, and the jacket connects to facility piping through a 1/4 inch connection thread, eliminating onboard fans. A housing protection rating of IP65 blocks dust and low-pressure water jets from the windings. A plain shaft delivers torque at a rated speed of 1500 rpm, and the motor is supplied without a holding brake or shaft sealing ring. The plain shaft is suited to direct coupling elements, while flange mounting places the terminal box on the B-side for orderly cable routing. Insulation class F supports the assigned thermal load, and position data is transferred over the EnDat2.1 serial interface for closed-loop motor control.

The feedback system uses a single-turn absolute encoder that provides 2048 increments per revolution and operates from a 7–12 V supply. Single-turn absolute feedback gives the drive immediate rotor-angle information within one mechanical revolution, which supports accurate speed regulation and repeatable motion. Operation is specified in the range of 0–40 °C, and derating is required above this range. Compliance with DIN EN 60034-14 sets permissible vibration limits for the assembly and supports use in precision machinery.