MAF100C-0150-FQ-S2-HG0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911374163
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF100C-0150-FQ-S2-HG0-05-N1 is a liquid-cooled asynchronous housing motor from the MAF IndraDyn Asynchronous Motors series. This motor features a rated speed of 1500 min-1, a flange mounting style, and IP65 protection. It comes with an EnDat2.1 single-turn absolute encoder with 2048 increments and supports a cooling thread size of 1/4 inch.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100C-0150-FQ-S2-HG0-05-N1 belongs to the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. It is a liquid-cooled housing motor built for automation cells that demand steady torque at moderate speed while keeping thermal load away from the machine frame. Through flange mounting, it couples directly to pumps, rollers, or gear stages, allowing compact installation in production lines, test stands, or material-handling stations.
This motor carries a protection rating of IP65, so its cast housing blocks dust and low-pressure water jets during continuous plant operation. Nominal rotation is set at 1500 rpm, matching drive controllers that supply sinusoidal current at 50 Hz. Cooling liquid circulates through internal channels, and the system connects to a liquid cooling circuit through a 1/4-inch threaded port. For feedback, the built-in single-turn absolute encoder communicates over EnDat2.1 and resolves rotor position into 2048 increments, powered from a stabilized source between 7–12 V. A plain shaft with a sealing ring helps prevent coolant or oil ingress, and the power conductors enter on the B-side through a turnable terminal box that simplifies cable routing inside cabinets. Frame size 100 with length code C provides space for the 0150 winding while keeping inertia compatible with medium-mass loads, and standard bearings guide the rotor with graded balancing used to limit vibration.
Mechanical behavior follows DIN EN 60034-14, and the windings use Class F insulation, supporting continuous copper temperatures up to 155 °C. Operation is specified for 0 to 40 °C ambient, so no derating is needed in typical factory rooms. The assembly meets vibration level A, which helps limit transmitted vibration near precision tooling and adjacent sensors. Because the motor is supplied without a holding brake, drive torque must remain active or an external clamp must be used when the machine stops. The 0150 winding code matches inverter current settings, and the flange interface uses tapped holes sized for the frame.
Frequently Asked Questions about MAF100C-0150-FQ-S2-HG0-05-N1:
Q: What type of cooling and connection does the MAF100C-0150-FQ-S2-HG0-05-N1 motor use?
A: The MAF100C-0150-FQ-S2-HG0-05-N1 motor uses liquid cooling with a 1/4 inch connection thread for efficient temperature regulation.
Q: What kind of encoder and resolution does the MAF100C-0150-FQ-S2-HG0-05-N1 feature?
A: This model is equipped with an EnDat2.1 single-turn absolute encoder offering 2048 increments resolution.
Q: Is there a holding brake on the MAF100C-0150-FQ-S2-HG0-05-N1 motor?
A: The MAF100C-0150-FQ-S2-HG0-05-N1 motor does not include a holding brake.
Q: What shaft and seal configuration does the MAF100C-0150-FQ-S2-HG0-05-N1 motor have?
A: A plain shaft with a shaft sealing ring is standard on this model, providing added protection against contaminants.
Q: What is the protection class rating of the MAF100C-0150-FQ-S2-HG0-05-N1 motor?
A: This motor meets IP65 protection class for resistance to dust and low pressure water jets.
