MAF100C-0150-FQ-S2-BG0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911390343
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF100C-0150-FQ-S2-BG0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features liquid cooling with a 1/4 inch connection thread. This motor is flange mounted, has a plain shaft with sealing ring, and carries an IP65 protection class rating. It uses a single-turn absolute encoder with EnDat2.1 interface and a resolution of 2048 increments, and operates at a rated speed of 1500 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100C-0150-FQ-S2-BG0-05-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. This flange-mounted unit converts electrical power into continuous torque for conveyors, mixers, or extruders that must run inside sealed enclosures. In automated lines, it works as the primary drive element while its liquid jacket removes heat, allowing full output even when airflow inside the machine frame is limited. Its enclosed format also suits equipment where splash, dust, or restricted ventilation make fan-cooled motors less practical.
Thermal management is handled by liquid cooling, routed through a 1/4-inch connection thread that matches common hydraulic fittings and keeps the stator within class F insulation limits. At a rated mechanical speed of 1500 rpm, the 100-frame rotor remains within vibration level A specified in DIN EN 60034-14. A single-turn absolute encoder with 2048 increments communicates over the EnDat 2.1 interface and runs from a 7–12 V supply, giving position feedback to IndraDrive controllers. Power enters through a connector placed on the B-side, simplifying cable routing while preserving the IP65 housing seal. Winding code 0150 identifies the electrical resistance used for this C-length stack, and standard bearings accommodate the radial and axial loads commonly found in belt-driven systems. The absence of a holding brake lowers reflected inertia when rapid index moves are commanded.
The mounting flange follows the motor’s DIN pattern, which supports direct installation on standardized machine interfaces. The motor has a shaft sealing ring around the plain shaft, helping prevent process fluids or washdown spray from reaching the bearings. The permitted ambient range of 0–40 °C suits most indoor equipment zones. The C-length housing provides a deeper stator packet without changing the 100 mm frame diameter, and the B-side power exit can simplify machine layouts where cable space is limited.
Frequently Asked Questions about MAF100C-0150-FQ-S2-BG0-05-N1:
Q: What type of shaft does the MAF100C-0150-FQ-S2-BG0-05-N1 motor feature?
A: This motor uses a plain shaft design for efficient power transmission.
Q: What is the cooling connection type and thread size for this motor?
A: The cooling system uses a 1/4 inch connection thread for liquid cooling attachments.
Q: What encoder type and interface are included with this motor?
A: The MAF100C-0150-FQ-S2-BG0-05-N1 is equipped with a single-turn absolute encoder that interfaces via EnDat2.1 and provides a resolution of 2048 increments.
Q: What is the protection class of the MAF100C-0150-FQ-S2-BG0-05-N1 motor?
A: This motor achieves a protection class rating of IP65, offering protection against dust and water.
Q: What ambient temperature range can the MAF100C-0150-FQ-S2-BG0-05-N1 operate in?
A: The permissible ambient temperature range for this model is 0 to 40 °C.
