Product Description:

The Bosch Rexroth Indramat MAF100C-0150-FQ-S2-AH0-05-A1 is part of the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous motor, it supplies controlled rotary power to automated lines that require constant speed and continuous duty. The unit fits flange-mounted frames and uses the series standard connector on the A-side for power. It is delivered without a holding brake, so stopping torque must come from the drive or an external lock.

At its nominal operating point, the rotor turns at 1500 rpm, a speed that aligns with common gear ratios and supports steady process operation. Thermal energy is removed by liquid cooling; coolant enters through a 1/4-inch connection thread on the motor's A-side, keeping stator temperature within Class F limits during continuous duty. The housing is rated IP65, preventing dust ingress and protecting against water jets in washdown zones. Position feedback travels over an EnDat2.1 digital link from the integrated single-turn absolute encoder. That device resolves motion into 2048 increments per revolution and operates from a 7–12 V supply from the inverter. The windings use Insulation class F, which supports insulation-system temperatures up to 155 °C.

A fixed bearing on the A-side carries axial forces while maintaining rotor alignment, and a plain shaft is furnished without a shaft sealing ring so external sealing elements can be selected at the machine level. Compliance with DIN EN 60034-14 confirms vibration level A performance in the 100-frame, length-C housing, which helps when the motor is directly flange-coupled to precision machinery. The A-side power connector orientation can simplify cable routing in tight panels. Winding code 0150 matches the electrical data expected by the drive, and operation is permitted in ambient temperatures from 0 to 40 °C.