Product Description:

The MAF100C-0150-FQ-S2-AG0-05-N1 is a liquid-cooled asynchronous housing motor developed by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is used as a drive element in industrial automation systems where continuous torque is needed in limited installation space. The motor combines an integrated coolant jacket with a sealed housing, which makes it suitable for tightly packed production equipment that cannot rely on ambient airflow for heat removal. This arrangement supports stable operation in enclosed machine layouts where conventional self-cooling would be less effective.

Its cooling circuit uses liquid cooling through a jacket that connects by a 1/4 inch threaded port for integration with plant cooling systems. Position feedback is transmitted through EnDat2.1 from a single-turn sensor with 2048 increments, allowing automatic parameter transfer and cable monitoring. The winding code 0150, frame size 100, and length code C are paired with Class F insulation for the motor’s electrical and thermal arrangement. Standard bearings support the rotor, flange mounting provides direct machine attachment, the power connector is located on the A-side, a shaft sealing ring protects the interior, and the enclosure is rated IP65 against dust and water jets.

The motor has a rated speed of 1500 rpm and uses a plain shaft for connection to gearboxes or pulleys. It operates in ambient temperatures from 0 to 40 °C, and compliance with DIN EN 60034-14 confirms balance within class A limits. The encoder electronics operate from 7 to 12 V, and the single-turn absolute format allows position data to be available after power-up without a homing cycle. The motor is supplied without a holding brake, and vibration level A helps maintain smooth running behavior during operation.