Product Description:

The MAF100C-0150-FQ-S0-LG0-05-N1 is a liquid-cooled asynchronous motor manufactured by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. In automated equipment, it serves as the primary rotary drive for machine tools, conveyors, and material-handling stations by converting electrical power into continuous torque. Its compact sealed housing supports installation in enclosed machine spaces, and the cooling circuit removes heat without relying on a separately mounted fan.

With motor frame size 100 and length code C, the unit uses flange mounting so the housing bolts directly to the machine frame without extra brackets. The drive end has a plain shaft with a shaft sealing ring, allowing rigid coupling while helping keep lubricant in place and contaminants away from the bearing area. A constant running speed of 1500 rpm matches common 50 Hz inverter operation, and the enclosure meets IP65 protection to resist dust and low-pressure water jets. Class F insulation permits winding temperatures up to 155 °C, while power enters through a left-side connector and the motor comes without a holding brake. Standard bearings support normal radial and axial loads for this motor type.

Thermal management relies on liquid cooling, delivered through a 1/4 inch threaded port that connects to industrial coolant manifolds. By removing heat from the stator, the motor can maintain full output across an ambient range of 0–40 °C without derating. Mechanical balance meets vibration grade A under DIN EN 60034-14, which helps reduce transmitted vibration to couplings and adjacent machine structures. The 0150 winding code matches the electrical characteristics expected by compatible IndraDrive inverters, and the shaft sealing ring helps protect the bearing cavity from coolant and debris.