Product Description:

The MAF100C-0150-FQ-S0-BG0-05-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a drive unit, it converts electrical energy into rotational motion for conveyor zones, spindle assemblies, and other automated machinery. It is suited for applications that require continuous torque at controlled speed.

The motor employs liquid cooling routed through a dedicated connection thread sized 1/4 inch, allowing closed-loop coolant circulation around the stator jacket to remove copper and iron losses. Its three-phase supply is introduced on the B-side through a connector, so wiring can be detached without disturbing neighboring equipment. Under nominal excitation, the rotor reaches 1500 rpm, which suits general-purpose machinery used with variable-speed inverters. The cast housing is sealed to IP65, preventing dust and water jets from entering during washdown service. Standard deep-groove bearings support the shaft, while vibration level A helps maintain smooth operation, and insulation class F allows the windings to tolerate a 155 °C hot spot.

Mechanical integration is simplified by flange mounting, and the output side uses a plain shaft with a shaft sealing ring that blocks coolant or airborne debris from the bearing cavity. The motor is supplied without a holding brake, so machines that need static torque must rely on external clamping or regenerative drive torque. Rated service is approved within 0 – 40 °C, matching typical enclosure climate targets for automation lines. Frame size 100 with length code C provides a moderate diameter and stack height while sustaining the required magnetic flux. All dimensional and vibration limits conform to DIN EN 60034-14, supporting compatibility with other IEC motors. The A-coded winding identifier 0150 indicates the conductor cross-section and thermal slot fill used by the stator.