Product Description:

The MAF100C-0150-FQ-S0-AP0-05-N1 asynchronous motor is built by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled housing motor, it serves as a drive source in automated machinery that needs stable torque during continuous duty, such as material-handling axes or spindle pumps. The motor uses a flange interface and an integrated power connection, allowing it to be mounted directly on machine frames or in other protected installations. Its enclosed housing suits applications where continuous operation is required in compact industrial equipment.

Thermal regulation is achieved through liquid cooling delivered by a 1/4-inch connection thread, which removes heat directly from the stator. This cooling arrangement allows the motor to maintain a rated speed of 1500 rpm during extended cycles without relying on external airflow. The housing is prepared for flange mounting and is sealed to IP65, which helps keep out airborne dust and low-pressure water jets. Operation is approved in ambient temperatures from 0 to 40 °C, and balanced-with-key shaft geometry helps reduce vibration at the driven load. The motor does not include a holding brake, so any static load must be secured by external means when power is removed.

Electrical integrity is supported by the F insulation class, which permits winding temperatures up to 155 °C without loss of dielectric strength. Power reaches the stator through a connector on the A-side, which helps reduce cable bending in right-hand machine layouts. The 0150 winding code and C frame code correspond to the selected electromagnetic layout for this motor size, and a shaft sealing ring limits the migration of coolant or lubricants along the keyway. The design follows DIN EN 60034-14, and the motor is dynamically balanced with a complete key installed to comply with the stated vibration grade. Standard bearings are used for normal service conditions.