Product Description:

The MAF100C-0150-FQ-M2-HG0-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat and assigned to the MAF IndraDyn Asynchronous Motors series. It serves as a drive element for automated systems that demand steady torque with minimal acoustic output. The motor body follows frame size 100 with the C length code, and standard bearings support the rotor during continuous operation. Flange and foot mounting points allow rigid integration, while the B-side power exit aligns cables with cabinet layouts. This arrangement suits production equipment that needs quiet operation, continuous-duty performance, and secure installation on machine frames or support structures.

At a rated speed of 1500 rpm, the rotor matches common industrial drivetrain requirements, enabling direct coupling to gearboxes or process machinery. The internal liquid cooling jacket connects through a 1/4-inch connection thread, so a closed coolant circuit can remove heat without external fan noise. Sealing is completed by a shaft ring and a cast housing rated IP65, which helps block dust ingress and water jets during wash-down cycles. Insulation class F supports reliable winding operation at elevated temperatures. Motion feedback is supplied by a multi-turn absolute encoder with 2048 increments per revolution, which supports accurate velocity control and retained position information after power loss.

Control wiring to the drive is routed through a turnable terminal box, and the feedback channel uses the EnDat2.1 interface energized by a 7 to 12 V supply. The drivetrain ends in a plain shaft, which simplifies coupling to clutches or belt pulleys, while vibration level A keeps running behavior within accepted limits. The motor does not include a holding brake, so external mechanical restraint is required when a load must remain fixed at standstill. Compliance with DIN EN 60034-14 covers balancing quality and mounting dimensions, and the motor operates in ambient temperatures from 0 °C to 40 °C while using winding code 0150.