Product Description:

The MAF100C-0150-FQ-M2-HG0-05-N1 is an asynchronous induction motor built by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled housing motor intended for drive tasks where constant torque and thermal stability are required, such as machine tools or forming equipment. As a housing motor, it integrates into closed machine frames and delivers rotary motion directly to the load without external fan units. When paired with a compatible inverter, it supports stable speed control under changing load conditions. Its housing format is also suited to machines where exposed motor surfaces and external airflow must be minimized.

This model relies on liquid cooling that circulates through a 1/4 inch connection thread to draw heat away from the stator laminations. Position feedback comes from an encoder that operates on 7-12 V and communicates through the EnDat 2.1 interface. Its resolution of 2048 increments supports precise velocity loops in the drive controller. Mechanical attachment uses flange mounting, and the terminal box can be rotated on the B-side to improve cable routing. The plain shaft uses a sealing ring to help keep coolant and process fluids out of the bearing cavity. This arrangement keeps the motor compact while allowing orderly power lead routing.

An enclosure rating of IP65 prevents dust ingress and guards against low-pressure water jets, allowing the motor to operate near coolant spray zones. Its base speed is 1500 rpm, which suits common 4-pole operation when the motor is controlled by an inverter. Continuous operation is permitted in ambient air from 0 to 40 °C, and class F insulation tolerates winding temperatures up to 155 °C. The feedback device is a multi-turn absolute encoder, so position remains available after power is removed. Vibration level A and balancing to DIN EN 60034-14 help reduce transmitted forces into connected machine elements, and the motor does not include a holding brake.