Product Description:

The MAF100C-0150-FQ-M0-BG0-05-N1 asynchronous motor is produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It belongs to a line of liquid-cooled asynchronous housing motors and is intended to deliver steady torque at moderate speed in automation axes that remove heat through an external coolant circuit. As a flange-mounted unit, it integrates directly with geared drives or pump heads. The absence of an internal brake means it is intended for systems where the drive controller or external mechanics hold the load at standstill.

It uses liquid cooling routed through a connection thread, and the port is cut to 1/4 inch to simplify integration with common industrial coolant manifolds. The stator winding follows insulation class F, allowing a permissible temperature rise that supports continuous service without thermal degradation. An enclosure rating of IP65 keeps dust and water jets away from the windings, so the housing motor can be mounted near processing zones. At its rated point, the rotor turns at 1500 rpm, a speed matched to vibration level A to keep dynamic imbalance within the limits used for precision equipment.

The electrical feed reaches the stator through a connector located on the B-side of the housing, which helps keep cables clear of adjacent machinery. The motor uses flange mounting that aligns with the 100 frame size, while the C length code adds stack depth without changing the outer diameter. A plain shaft is protected by a sealing ring to help prevent coolant or process fluids from entering the standard bearing set. The allowed ambient range extends to 40 °C, and conformity to DIN EN 60034-14 confirms the declared vibration limits. Winding code 0150 matches the drive parameters used for this motor, and the unit is supplied without a holding brake, so load retention must be handled externally.