Product Description:

The MAF100C-0100-FR-S6-KGO-05-N1 is an asynchronous drive motor produced by Bosch Rexroth Indramat and delivered within the MAF IndraDyn Asynchronous Motors series. Used with a compatible drive system, it converts electrical input into controlled rotary motion for industrial machinery that requires steady speed and torque behavior. As a housing motor, it is intended for applications where heat is carried away through a coolant circuit instead of by fan-based airflow. The flange-mounted design fits enclosed machine layouts and supports direct integration into processing and handling equipment.

At its rated point, the motor reaches 1000 rpm, matched to winding code 0100 for steady torque at low frequencies. Heat generated in the stator is removed by liquid cooling, and the motor follows vibration level A under DIN EN 60034-14 for smooth running during continuous duty. The motor uses frame size 100 with length code C, and the standard bearing set supports the mounting geometry. The enclosure is rated IP65 and uses a shaft sealing ring, allowing installation in wash-down sections. Rotor position is returned through the EnDat2.1 interface by a single-turn absolute encoder with 2048 increments per revolution, giving the drive accurate position data for closed-loop control.

Coolant enters and exits through an enclosed rapid-action coupling sized 1/4 inch, which allows quick connection and disconnection of the coolant lines. The encoder signal can travel up to 15 m without amplification because the 7 to 12 V supply range maintains stable transmission margins. Class F insulation supports the winding temperatures used by this cooling method, and permissible ambient conditions span 0 to 40 °C. The plain shaft supports keyless hub connections, and the housing gaskets help preserve the seal during operation.