Product Description:

The MAF100C-0100-FR-S6-FG0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled unit, it fits applications where enclosure temperatures must stay low during continuous duty. Within an automation cell, the motor turns electrical input into controlled mechanical rotation so drive controllers can position conveyors, tooling, or auxiliary axes under sustained thermal load. Its housing-style construction also supports installation where a compact motor package is preferred over separate external cooling hardware.

The stator jacket uses liquid cooling, which carries heat away through an internal channel. Coolant enters and exits through an enclosed rapid-action coupling, enabling hose changes without draining the circuit, and the port diameter is 1/4 inch for connection to standard fittings. Rotor position is captured by a single-turn absolute encoder that communicates through the EnDat2.1 interface and resolves motion into 2048 increments per revolution while operating from a 7 to 12 V supply rail. This arrangement supports stable feedback transmission and helps the drive maintain accurate speed control during changing load conditions.

Mechanical integration uses a flange mounting pattern sized for the 100 frame and length code C. The rotor runs on standard bearings and drives a plain shaft sealed by a lip ring, giving the enclosure an IP65 rating for dusty or wet areas. Because the unit is supplied without a holding brake, external mechanics or the inverter must secure the load at standstill. Class F insulation and vibration level A in accordance with DIN EN 60034-14 help limit thermal rise and structural stress during operation. Winding code 0100 supports a rated speed of 1000 rpm, and reliable operation is permitted in ambient temperatures from 0 to 40 °C before derating is required.