Product Description:

The MAF100C-0100-FQ-S2-RH0-05-A1 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is intended for industrial automation lines that require steady torque delivery while keeping stator temperatures under control, allowing the drive controller to maintain speed accuracy under continuous duty. Its housing design supports use in demanding machine applications where stable operation is required over long run times.

The motor uses liquid cooling, and coolant enters and exits through a connection thread that measures 1/4 inch, so standard hydraulic fittings can be installed without adapters. Motion feedback is provided by a single-turn absolute encoder that communicates over the EnDat2.1 interface, delivering position data in 2048 increments and operating from a supply range of 7–12 V. This arrangement allows one cable to carry both power and bidirectional data. Fixed bearings on the A side support axial forces, while the flange mount seats the 100-frame housing flush against gearboxes or machine plates. The power lead exits on the right through a keyed connector, and winding code 0100 matches the stator to the magnetic loading used by the C-length frame. The lack of a shaft sealing ring keeps friction low, but an external seal is needed if fluids are present.

The enclosure has a rating of IP65, which blocks dust and low-pressure water jets. The stator can run continuously at a rated speed of 1000 rpm without exceeding insulation class F, and operation is permitted from 0 to 40 °C. The motor is supplied without a holding brake, so any static load must be secured by drive torque or by an external mechanical lock. It also has a plain shaft, vibration level A per DIN EN 60034-14, and a conduit-free liquid path, which help keep the unit compact for installation in presses, forming machines, and conveyor heads.