MAF100C-0100-FQ-S2-AP0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911376464
The Bosch Rexroth Indramat MAF100C-0100-FQ-S2-AP0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features liquid cooling with a 1/4 inch connection thread. It uses a single-turn absolute encoder with EnDat2.1 interface and a resolution of 2048 increments. This flange-mounted motor has an IP65 protection class and is rated for a speed of 1000 min-1.
Internal Product Review
The MAF100C-0100-FQ-S2-AP0-05-N1 is a liquid-cooled asynchronous housing motor from Bosch Rexroth Indramat with a rated speed of 1000 min-1. EnDat2.1 feedback and 2048-increment resolution give the motor accurate position data and smooth control response. IP65 protection and flange mounting make the package especially appealing for enclosed machine installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100C-0100-FQ-S2-AP0-05-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat and supplied within the MAF IndraDyn Asynchronous Motors series. It converts three-phase supply power into regulated rotary motion for conveyors, extruders, and other continuous-duty stations in industrial automation. A fixed coolant jacket replaces external fan hardware, allowing the motor to fit inside sealed machine frames. Mechanical coupling is provided by a keyed shaft, and the flange mounting face supports rigid attachment to gearboxes or support plates. This arrangement also helps the motor operate in installations where external airflow around the housing is limited.
The enclosure carries a protection classification of IP65, so dust and water jets do not reach the bearings or windings. Heat is removed through liquid cooling, and the coolant enters and exits through a 1/4 inch connection thread that mates with standard process fittings. Position feedback comes from a single-turn absolute encoder that delivers 2048 increments per revolution over the EnDat2.1 serial interface and is powered from a 7–12 V supply. This feedback arrangement gives the drive immediate rotor position data for controlled startup and stable speed regulation. Standard bearings support the rotor, insulation class F permits winding temperatures up to 155 °C, and a shaft sealing ring helps retain lubricant while limiting contaminant entry. The motor is supplied without a holding brake, which keeps the overall assembly shorter.
The motor has a rated speed of 1000 rpm, which suits low-speed, high-torque drive sections commonly found in forming or mixing equipment. It retains full performance within an ambient range of 0 to 40 °C, which supports use in enclosed machinery under normal industrial conditions. Vibration behavior meets DIN EN 60034-14, helping the shaft system run smoothly when the motor is mounted on a suitable foundation. Power and brake conductors exit on the A-side through a sealed connector, which helps route cables away from rotating parts. Winding code 0100, together with the 100 mm frame size and C-length stator, sets the motor's electrical characteristics and thermal mass for this housing size.
