MAF100C-0100-FQ-S2-AG0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911372375
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF100C-0100-FQ-S2-AG0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and uses liquid cooling via a 1/4 inch connection thread. This asynchronous motor features flange mounting, a plain shaft with a sealing ring, and is protected to IP65 standards. It includes a single-turn absolute encoder with EnDat2.1 interface and a resolution of 2048 increments, and operates with an insulation class F.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100C-0100-FQ-S2-AG0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for flange mounting in enclosed machine frames, the unit supplies continuous rotary power to conveyor sections, spindles, and presses that require constant torque at regulated speed. As an industrial automation component, it works with an external inverter and absolute feedback to support closed-loop motion control. Because it uses an asynchronous motor design, operating speed is regulated by the drive rather than by line frequency alone. This arrangement suits applications that run for long periods and need steady torque under changing process loads.
Its stator jacket is traversed by a closed coolant circuit, and liquid cooling removes heat directly from the winding so the motor can sustain output where surrounding airflow is limited. Coolant enters and leaves through a 1/4 inch connection thread, which fits common manifold hardware used in compact machine frames. A molded housing and shaft-side sealing ring provide IP65 protection, helping keep splashed fluids and dust away from internal electrical parts. Under nominal excitation, the rotor turns at 1000 rpm, and position feedback comes from a single-turn absolute encoder with 2048 increments. That feedback helps the drive correct slip and maintain stable rotation when the driven load changes.
The feedback head communicates over EnDat2.1, which supports bidirectional data exchange and automatic position verification after power-up. Class F insulation allows winding temperatures up to 155 °C, and the permitted ambient range of 0–40 °C supports operation in typical enclosed industrial equipment. Compliance with DIN EN 60034-14 corresponds to vibration level A, which helps the plain shaft run smoothly when coupled to a gearbox or other driven element. Power is connected on side A, and the motor is supplied without a holding brake. Holding torque at standstill must therefore be provided by the drive or by external mechanical means.
Frequently Asked Questions about MAF100C-0100-FQ-S2-AG0-05-N1:
Q: What type of encoder and resolution does the MAF100C-0100-FQ-S2-AG0-05-N1 motor feature?
A: This motor utilizes a single-turn absolute encoder with 2048 increments for position feedback.
Q: What cooling method and connection type are used on this motor?
A: The MAF100C-0100-FQ-S2-AG0-05-N1 is liquid cooled and uses a 1/4 inch connection thread for the cooling system.
Q: What level of environmental protection does this motor have?
A: With IP65 protection, the motor is dust-tight and protected against water jets.
Q: Which encoder interface is available on the MAF100C-0100-FQ-S2-AG0-05-N1 motor?
A: This model supports EnDat2.1 as its encoder interface, providing robust digital communication for feedback.
Q: What is the shaft configuration and does it include a sealing ring?
A: The shaft on this motor is a plain shaft and is equipped with a shaft sealing ring.
