Product Description:

The MAF100C-0100-FQ-N0-KP0-05-N1 asynchronous motor is produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed as a liquid-cooled housing motor, it supplies continuous torque for conveyor sections, extruders, and other automated axes that benefit from high thermal loading capacity. In an automation cell, the motor acts as the electromechanical drive, converting inverter-supplied electrical power into controlled rotation for connected machinery. Its housing format supports compact installation on machines where steady output is needed without using a large motor footprint.

Heat management is handled by liquid cooling, delivered through a connection thread of 1/4 inch, so coolant circulates directly around the stator jacket. The cast housing achieves IP65 protection, keeping internal components free from dust and low-pressure water jets. A rated rotor speed of 1000 min⁻¹ favors high torque at moderate frequency, which suits process equipment that runs under sustained load. Windings use a class F insulation system, permitting winding temperatures up to 155 °C without breakdown. Installation relies on flange mounting, which helps keep the motor aligned with the driven machine. The output shaft uses a complete key and keyway, and a shaft sealing ring helps limit contamination at the drive end.

Operation is permitted from 0 to 40 °C, so the motor can run in a typical factory environment without added cooling measures or power derating. Mechanical behavior follows vibration grade A of DIN EN 60034-14, which supports smooth rotation and consistent bearing operation. The unit is supplied without a holding brake, so static loads must be secured by the drive system when the shaft is stopped. An encoder is not installed, and winding code 0100 with frame length C identifies the electrical data used by compatible IndraDrive inverters.