Product Description:

The MAF100C-0100-FQ-M2-FP1-05-N1 is an induction motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it supplies continuous rotary power to conveyor sections, extruders, and other automation axes that require stable torque at low speeds. A flange-mounting interface lets the unit seat directly against machine plates. The 100 C frame format suits compact enclosures where heat must be carried away by the motor rather than released into the surrounding air.

The drive reaches a rated speed of 1000 rpm, allowing tight speed regulation from vector inverters without exceeding stator frequency limits. Heat generated during operation is removed by the integrated liquid cooling circuit, which connects through a 1/4-inch thread so hoses can be sealed securely. An enclosure rating of IP65 keeps dust and coolant splashes away from live parts, while the shaft sealing ring helps block washdown water at the output journal. The motor can hold stationary loads with 24 Nm of brake torque from an electrically released holding brake. Position data are delivered over the EnDat 2.1 interface, and the multi-turn absolute encoder resolves each mechanical turn into 2048 increments for closed-loop feedback.

The encoder operates on a 7 to 12 V supply, and winding code 0100 uses class F insulation for a thermal limit of 155 °C. Operation is permitted at ambient temperatures from 0 to 40 °C, with vibration kept within severity class A according to DIN EN 60034-14. The shaft is balanced with complete key, and a keyway is machined for rigid coupling to gearboxes. Standard bearings and the threaded coolant connection support stable operation in installations that need sealed construction, liquid heat removal, and accurate feedback without external air-cooling hardware.