MAF100C-0050-FQ-S2-AH0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911376009
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF100C-0050-FQ-S2-AH0-05-N1 is a liquid-cooled asynchronous motor that is part of the MAF IndraDyn Asynchronous Motors series. It features a flange mounting style, IP65 protection class, and a plain shaft without a sealing ring. This model uses a single-turn absolute encoder with a resolution of 2048 increments, operates at a rated speed of 500 revolutions per minute, and supports liquid cooling with a 1/4 inch connection thread.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100C-0050-FQ-S2-AH0-05-N1 is an asynchronous drive motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled asynchronous housing motor intended to power positioning or processing axes in automation lines. Heat is transferred into a coolant circuit instead of being released mainly into the surrounding air, which helps keep nearby electrical spaces thermally stable. This layout suits machines that need controlled motion together with compact installation around enclosed process equipment.
Thermal management relies on liquid cooling that circulates through a 1/4-inch connection thread on the stator jacket. The threaded port mates with common coolant manifolds and helps preserve the housing seal. Feedback comes from a single-turn absolute encoder using the EnDat2.1 interface, and its resolution of 2048 increments supports tight velocity loops. The encoder electronics accept 7 to 12 V from the drive, so no separate converter is required. The motor mounts on a flange, and the plain shaft couples directly to the load. There is no shaft sealing ring, so external sealing may be added where pressurized lubricants are present. Power exits on the A-side through a locking connector, while standard bearings support the rotor and the motor is supplied without a holding brake.
The motor reaches a rated speed of 500 rpm, which suits low-speed, high-torque drive arrangements. Its housing has an IP65 protection rating, so dust and water jets do not compromise operation, and insulation class F permits winding temperatures up to 155 °C. Compliance with DIN EN 60034-14 places the vibration level in category A. Operation is specified for ambient conditions from 0 to 40 °C without derating. Dimensional identifiers such as frame size 100, frame length code C, and winding code 0050 indicate the magnetic stack and help match the motor to suitable inertia and current requirements.
Frequently Asked Questions about MAF100C-0050-FQ-S2-AH0-05-N1:
Q: What type of encoder is utilized on the MAF100C-0050-FQ-S2-AH0-05-N1 motor?
A: This motor uses a single-turn absolute encoder with EnDat2.1 interface at a resolution of 2048 increments.
Q: What cooling method is implemented for this motor, and what is the thread size for its cooling connection?
A: The MAF100C-0050-FQ-S2-AH0-05-N1 features liquid cooling with a 1/4 inch connection thread.
Q: What is the shaft configuration for the MAF100C-0050-FQ-S2-AH0-05-N1?
A: This model does not include a shaft sealing ring and uses a plain shaft design.
Q: Does the MAF100C-0050-FQ-S2-AH0-05-N1 motor come with a holding brake?
A: The holding brake is not included on this motor model.
Q: What is the rated speed of the MAF100C-0050-FQ-S2-AH0-05-N1 asynchronous motor?
A: This motor is rated for a speed of 500 revolutions per minute.
