Product Description:

The MAF100B-0200-FQ-S2-AH0-35-H4 is an asynchronous induction motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous motor, it combines frame size 100 with frame length B to supply constant torque in compact automation cells. The unit uses flange and foot mounting, and its power conductors exit on the A-side through a sealed connector, which simplifies cable routing in conveyor, press, and forming machinery.

Heat is removed by a liquid cooling system that uses a connection thread of 1/4 inch, allowing the use of standard quick-connect fittings. High-speed bearings support the rotor during rated operation, while vibration level C helps limit dynamic movement transmitted to the machine frame. Position feedback is provided by a single-turn absolute encoder that communicates over the EnDat2.1 channel. Its resolution of 2048 increments allows fine velocity control, and the sensing electronics accept a supply of 7-12 V, permitting direct power from most drive controllers. Winding code 0200 identifies the coil set used, and insulation class F allows elevated winding temperatures during extended duty cycles without degrading dielectric strength.

The motor is delivered without a holding brake, so static load securing must rely on the drive or external clamps. A plain shaft is provided without a shaft sealing ring, which reduces friction losses in high-cycle applications. The enclosure has a protection rating of IP65, guarding against dust intrusion and low-pressure water jets. Nominal operation is specified at 2000 rpm, and the balanced rotor supports stable running at that speed. Ambient conditions should remain between 0 to 40 °C, and the cooling loop helps keep internal temperatures within that range during operation.