Product Description:

The MAF100B-0200-FQ-S2-AH0-05-H1 is an asynchronous motor produced by Bosch Rexroth Indramat and assigned to the MAF IndraDyn Asynchronous Motors series. It is intended for machinery that requires continuous torque at moderate speed in automated production cells and test rigs. As an asynchronous motor, it converts electrical input into rotary motion for conveyors, process equipment, and other continuously running axes. The housing motor layout supports compact installation where machine space is limited, and its flange-mounted construction allows rigid attachment to a gearbox or directly to a driven load in enclosed industrial systems.

Inside the housing, a high-speed bearing set supports the rotor and matches the motor’s nominal speed of 2000 rpm. Heat is removed through liquid cooling, while the stator uses class F insulation and vibration grade A for normal industrial operation. The motor has frame size 100 with length code B, a flange mount, and a plain shaft without a sealing ring to reduce running friction at the output. Power conductors enter through a connector on the A-side, and the enclosure is rated IP65 for dust-tight construction and resistance to low-pressure water jets. Operation is specified from 0 °C to 40 °C, and winding code 0200 identifies the electrical winding arrangement used in this version.

Rotor position is reported by an EnDat2.1 single-turn absolute encoder with 2048 increments, and the feedback device operates from a 7–12 V supply provided by the drive controller. The single-turn format provides absolute position data within one mechanical revolution for controlled startup and motion regulation. Mechanical vibration behavior follows DIN EN 60034-14, keeping operation within the stated balance grade during normal service. Liquid coolant enters through a 1/4-inch inlet that matches standard plant plumbing and supports stable thermal transfer across the motor housing. The motor is supplied without a holding brake, so load holding at standstill must be provided by the drive system or by external mechanical means.