MAF100B-0200-FQ-C0-AL0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911385453
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF100B-0200-FQ-C0-AL0-05-N1 is part of the MAF IndraDyn Asynchronous Motors series and features flange mounting along with a 100 frame size and B frame length. It uses liquid cooling with a 1/4 inch connection thread and provides a rated speed of 2000 min-1. The motor has an incremental encoder with 2048 increments and comes with IP65 protection class, conforming to DIN EN 60034-14.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100B-0200-FQ-C0-AL0-05-N1 is a liquid-cooled induction motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. This housing-type unit is intended for flange mounting on automated machine frames, where it converts electrical power from a drive controller into rotary motion for material-handling axes, indexing tables, or packaging equipment. By circulating coolant through dedicated ports, the motor maintains stable operating temperatures even when installed in compact, thermally constrained machine spaces. Its design also suits applications where nearby equipment adds heat and limits the usefulness of open-air cooling during long production cycles.
The rotor is designed for a rated speed of 2000 rpm, allowing coordinated velocity profiles with typical servo drives. Internal heat is removed by liquid cooling; the integral jacket carries heat away from the stator during continuous operation. An enclosure rating of IP65 prevents dust ingress and low-pressure water jets from reaching live parts, enabling placement close to washdown zones. Positional feedback is provided by an incremental sensing system that delivers 2048 increments per revolution, and the encoder electronics are powered from a regulated 5 V supply available on the drive interface. This feedback arrangement supports stable speed control while the cooling circuit helps protect winding life in continuous-duty use.
Thermal endurance is supported by insulation class F. Torque is transferred through a shaft machined with a keyway, and dynamic balancing uses a half-key so the rotor remains within vibration level A under DIN EN 60034-14. Coolant lines attach through a 1/4 inch threaded connection on the A-side power terminal block, which helps keep hose routing orderly around the motor housing. Continuous service is permitted in ambient temperatures from 0 to 40 °C. The motor operates without a holding brake or shaft sealing ring, so external load holding is required where the axis must remain fixed at standstill.
Frequently Asked Questions about MAF100B-0200-FQ-C0-AL0-05-N1:
Q: What type of bearing is used in the MAF100B-0200-FQ-C0-AL0-05-N1 motor?
A: This model is equipped with a standard bearing, ensuring reliable rotational support during operation.
Q: What is the cooling method and connection size on the MAF100B-0200-FQ-C0-AL0-05-N1 motor?
A: The MAF100B-0200-FQ-C0-AL0-05-N1 uses liquid cooling, with a 1/4 inch connection thread for coolant input.
Q: What type of encoder and resolution are included on the MAF100B-0200-FQ-C0-AL0-05-N1?
A: An incremental encoder with 2048 increments and a 5 V supply provides accurate position feedback for this motor.
Q: What protection class does the MAF100B-0200-FQ-C0-AL0-05-N1 asynchronous motor meet?
A: This motor is built to protection class IP65, offering solid resistance against dust and low-pressure water jets.
Q: What is the rated speed of the Bosch Rexroth Indramat MAF100B-0200-FQ-C0-AL0-05-N1 motor?
A: The rated speed for this model is 2000 min-1, making it suitable for medium-speed applications.
