Product Description:

The MAF100B-0150-FQ-S2-BF0-35-A1 is an asynchronous motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled housing unit built for continuous-duty drives in industrial automation where stable torque and compact dimensions are needed. The motor integrates a single-turn absolute encoder for position feedback and supports flange or foot mounting, allowing straightforward alignment with standard machinery.

Heat is removed through liquid cooling that circulates coolant through a 1/4-inch connection thread near the B-side power connector. This cooling method keeps the fixed bearing on side A at a uniform temperature and helps limit thermal growth during operation. Position data are delivered through the EnDat2.1 interface, and the encoder provides 2048 increments while operating from a regulated 7-12 V supply. Process wiring is protected by a housing rated to IP65, helping prevent the ingress of dust and low-pressure water jets during washdown cycles. A labyrinth seal on the plain shaft adds a secondary barrier against fluids, and the power and signal plugs are oriented on side B to clear adjacent equipment. Winding code 0150 matches the stator to compatible drive inverters.

The motor reaches a rated speed of 1500 rpm when matched to an inverter that observes class F insulation limits. Operation is specified within an ambient range of 0 to 40 °C, matching vibration level A balance quality used in the series. Frame size 100 with length code B offers a compact envelope while meeting the dynamic requirements of DIN mounting patterns. Because the motor does not include a holding brake, vertical axes require a static clamping device when the load must remain fixed at standstill. The motor follows DIN EN 60034-14, so shaft-end vibration and balance are suitable for general-purpose drives in conveyors, pumps, and light processing equipment.