Product Description:

The MAF100B-0150-FQ-S2-AG0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. The unit is intended for flange mounting in automated production cells where constant torque and accurate feedback are required for conveyor sections, rotary tables, and forming equipment. Its housing accepts a liquid circuit that stabilizes stator temperature during continuous duty, allowing higher power density than comparable air-cooled designs. This arrangement is useful in enclosed machine areas where external airflow is limited and stable thermal behavior is important.

Heat removal is handled by liquid cooling routed through a jacket that terminates in a 1/4 inch connection thread. Power reaches the motor through an A-side connector, while the bearing set follows the standard design for this frame. Rotor position is measured with a single-turn absolute encoder that transmits EnDat2.1 serial data at 2048 increments and receives excitation in the 7 to 12 V range. The stator winding uses code 0150, and the frame combines size 100 with length B so the mechanical interface remains consistent with DIN EN 60034-14. The motor is supplied without a holding brake, which reduces mass and supports straightforward axial installation, while vibration level A is suitable for lightly damped machine bases.

The motor reaches a rated speed of 1500 rpm and delivers output torque through a plain shaft with a shaft sealing ring that helps block coolant ingress. The enclosure meets IP65, which protects the motor against dust and low-pressure water jets in demanding industrial areas. Operation is permitted in an ambient temperature range of 0 to 40 °C, and Class F insulation supports the temperature rise associated with liquid-cooled operation. The flange body also helps maintain alignment with the mounting surface to support smooth running during continuous service.