MAF100B-0150-FQ-M2-AH0-05-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911326014
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF100B-0150-FQ-M2-AH0-05-N1 is a liquid-cooled asynchronous housing motor from the MAF IndraDyn Asynchronous Motors series. It features flange mounting, a plain shaft without a sealing ring, and an IP65 protection class. The motor uses a multi-turn absolute encoder with EnDat2.1 interface and 2048 increments resolution, and supports a rated speed of 1500 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF100B-0150-FQ-M2-AH0-05-N1 is an asynchronous motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous motor is intended for closed-loop industrial drive systems where waste heat must be removed from the machine frame. Its flange mounting face lets machine builders bolt the stator directly to gearboxes or structural plates, and the A-side power connector streamlines cabinet wiring. This arrangement is useful where surrounding equipment cannot rely on open external airflow to remove motor heat. Within automated lines, the motor supplies controlled shaft rotation that can be synchronized with encoder feedback for precise material transport, positioning, or forming operations.
The motor has a frame size of 100 with length code B, giving a compact envelope while still allowing the rotor to reach a rated speed of 1500 rpm under continuous load. The integrated multi-turn absolute encoder communicates over an EnDat2.1 serial link, delivers 2048 increments of resolution per revolution, and draws 7 to 12 V from the drive. That feedback arrangement allows the connected drive to monitor rotor position continuously during speed and positioning tasks. The housing has an IP65 protection rating that resists dust ingress and low-pressure water jets, while standard bearings keep radial runout within the limits of vibration level A. Winding code 0150 identifies the stator copper layout used for this speed and torque combination.
The windings use F insulation class, permitting conductor temperatures suitable for heavy cyclic duty. A permissible ambient range of 0 to 40 °C matches typical shop-floor climates, and the motor complies with DIN EN 60034-14 for balancing quality. Drive torque is transmitted through a plain shaft, and there is no shaft sealing ring, so external protection should be provided when the installation faces pressurized fluids. The motor is delivered without a holding brake, making it appropriate for systems that secure position through drive torque or external clamps. A connection thread sized 1/4 inch handles the coolant circuit, avoiding the need for custom adapters to integrate liquid flow lines.
Frequently Asked Questions about MAF100B-0150-FQ-M2-AH0-05-N1:
Q: What cooling method does the MAF100B-0150-FQ-M2-AH0-05-N1 motor use?
A: This motor uses liquid cooling and requires a 1/4 inch connection thread for its coolant line.
Q: What type of encoder and resolution does this model have?
A: The MAF100B-0150-FQ-M2-AH0-05-N1 features a multi-turn absolute encoder with a resolution of 2048 increments.
Q: What is the operating temperature range of the MAF100B-0150-FQ-M2-AH0-05-N1?
A: The permissible ambient temperature for this motor is between 0 and 40 °C.
Q: What is the IP protection rating of the MAF100B-0150-FQ-M2-AH0-05-N1 motor?
A: The protection class of this model is IP65, providing dust-tight and water jet protection.
Q: What shaft type and sealing are provided on the MAF100B-0150-FQ-M2-AH0-05-N1 motor?
A: This motor is equipped with a plain shaft and does not include a shaft sealing ring.
