Product Description:

The MAF100B-0100-FQ-S2-AH0-05-N1 is an asynchronous drive from Bosch Rexroth Indramat that belongs to the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled housing motor, it is installed where high continuous torque must be delivered without raising the cabinet temperature, such as in plastic extruders, paper lines, or test stands. Within an automated cell, it converts variable-frequency inverter power into steady mechanical motion for the connected load and supports continuous-duty operation in demanding process equipment.

The motor dissipates heat through liquid cooling that is plumbed through a 1/4 inch connection thread on the stator jacket, allowing chilled water loops to remove losses efficiently. A sealed housing rated at IP65 blocks dust and low-pressure water jets, while the lack of a holding brake and shaft sealing ring reduces service points for continuously running equipment. Torque is transmitted by a plain shaft that seats in standard bearings, and axial installation is supported by flange mounting. Electrical energy reaches the stator windings through a connector on the A-side, and the motor has frame size 100 with length code B. With a rated speed of 1000 rpm, the machine is tuned for high torque at moderate speed, matching winding code 0100 and insulation class F for thermal endurance.

Closed-loop positioning relies on an EnDat2.1 interface that carries data from the single-turn absolute encoder, which resolves the shaft into 2048 increments and operates from a supply of 7 to 12 V. Operation remains stable within an allowable ambient range of 0 to 40 °C, assisted by vibration level A balancing and a standard bearing set. Compliance with DIN EN 60034-14 confirms the stated vibration grades and supports accurate operation in production environments that run for extended periods.